Ignition Repair — Keys That Won't Turn, Worn Barrels & Ignition Faults

When the ignition stops behaving, it is tempting to assume the whole barrel needs replacing. Often it does not. A key that will not turn, a car that will not switch on and a car that will not recognise its key can look similar from the driver's seat, but they are different faults with different fixes.

We assess the key and the ignition at your vehicle first, then explain what we think is wrong and what the options are before any work is carried out. Repair or replacement is offered where it is supported for the individual vehicle.

Three different kinds of ignition problem

It helps to separate ignition problems into three groups, because the symptom alone rarely tells you which one you have.

  • Mechanical barrel faults — the key will not go in, will not turn, sticks part-way or turns only with jiggling. This usually involves the lock barrel itself, the key blade, or both.
  • Electrical ignition switch faults — the key turns normally, but the dashboard, accessories or starter do not respond as they should. The fault sits in the switch behind the barrel rather than in the part the key turns.
  • Immobiliser or key-recognition problems — the key turns and the dashboard lights up, but the vehicle does not recognise the key and will not start or stay running. This is related to the key's electronics or programming rather than the ignition lock.

Keys that will not turn

A key that refuses to turn is one of the most common ignition calls. Sometimes the cause is simple: steering lock tension, a worn key blade that no longer lifts the barrel correctly, or debris in the lock. Sometimes the barrel itself is worn or damaged.

Forcing the key is the thing most likely to make it worse, and can snap the blade inside the ignition. If it will not turn with gentle pressure while moving the steering wheel slightly, it is worth stopping and calling.

Sticking or worn mechanical ignition barrels

Ignition barrels wear over years of use, and so do key blades. A key that has gradually needed more wiggling to turn is often a sign of wear in one or both. In some cases a new key cut to the correct specification restores normal operation; in others the barrel needs attention.

Diagnosis matters here: replacing a barrel when the real problem is a worn key, or cutting a new key when the barrel is failing, wastes money. We check both before recommending anything.

Broken keys in the ignition

If a blade snaps in the ignition, the remaining piece needs removing carefully so the barrel is not damaged further. Once it is out, the condition of the barrel can be checked and a replacement key arranged where the vehicle is supported.

Ignition repair and replacement where supported

Depending on what is found, the right answer may be a repair, a replacement ignition switch, a replacement barrel, a new key, or a combination. Some vehicles and ignition types are supported at the vehicle; others are better handled by a main dealer, and we will say so honestly.

Symptoms on their own do not mean the barrel needs replacing. We confirm the cause first and quote for the work that is actually needed.

A recent ignition job

On a 2013 Škoda Fabia in Hertford, the customer's ignition would not switch on because the ignition switch had failed, and their original key was also worn. We fitted a new ignition switch and replaced the worn key case.

Frequently asked questions

My key will not turn in the ignition. Does the barrel need replacing?
Not necessarily. Steering lock tension, a worn key blade or debris can all stop a key turning. We check the key and the barrel before recommending any replacement.
The key turns but nothing happens. Is that the ignition?
It may be the electrical ignition switch, but it can also be a battery or another electrical fault. If the dashboard lights up but the car will not start, the problem may instead be key recognition. Each needs a different fix, so we diagnose first.
Can you remove a key that has snapped in the ignition?
Usually, yes. It is best not to try with pliers or glue first, as that can damage the barrel. Once the broken piece is out, a new key can be arranged on supported vehicles.
Is ignition work carried out at the vehicle?
Where the vehicle and ignition type are supported, assessment and repair work is carried out where the vehicle is parked. We will confirm this when you give us the vehicle details.
What should I tell you when I call?
The make, model, year and registration, exactly what happens when you try the key, whether the key is damaged or worn, and where the vehicle is parked.
CallGet a quote